标题: 问几个与硬盘相关的英文术语(同时9楼推荐一个检测硬盘寿命的软件) [打印本页] 作者: TL 时间: 2005-12-25 14:59 标题: 问几个与硬盘相关的英文术语(同时9楼推荐一个检测硬盘寿命的软件) 1、Raw read erro rate
2、spin up time
3、seek erro rate
4、power-on hours count
5、Device power cycle count
分别什么意思?作者: Duron800 时间: 2005-12-25 15:15 标题: 回复: 问几个与硬盘相关的英文术语 字面翻译:1.原始读取错误率 3搜索错误率 4硬盘工作的时间作者: keithkid 时间: 2005-12-25 16:17 标题: 回复: 问几个与硬盘相关的英文术语 5应该是硬盘加电次数
3应该叫寻道错误率
2是从加电到电机稳定时间
反之spin down time显而易见...作者: TL 时间: 2005-12-25 20:46 标题: 回复: 问几个与硬盘相关的英文术语 1和4呢。。。。。作者: allstar 时间: 2005-12-25 21:44 标题: 回复: 问几个与硬盘相关的英文术语 4. Count of hours in power-on state. The raw value of this attribute shows total count of hours (or minutes, or seconds, depending on manufacturer) in power-on state. A decrease of this attribute value to the critical level (threshold) indicates a decrease of the MTBF ([I]Mean Time Between Failures).
However, in reality, even if the MTBF value falls to zero, it does not mean that the MTBF resource is completely exhausted and the drive will not function normally.作者: allstar 时间: 2005-12-25 21:46 标题: 回复: 问几个与硬盘相关的英文术语 1.
This attribute value depends of read errors, disk surface condition and indicates the rate of hardware read errors that occurred when reading data from a disk surface. Lower values indicate that there is a problem with either disk surface or read/write heads.作者: allstar 时间: 2005-12-25 21:46 标题: 回复: 问几个与硬盘相关的英文术语 你查这些SMART的参数干啥??作者: jimmylotus 时间: 2005-12-25 21:49 标题: 回复: 问几个与硬盘相关的英文术语 1、Raw read erro rate
错误读取率
2、spin up time
硬盘马达达到规定转速所花费的时间
3、seek erro rate
寻道出错率
4、power-on hours count
硬盘开电时间总和
5、Device power cycle count
硬盘加电次数总和作者: TL 时间: 2005-12-25 21:54 标题: 回复: 问几个与硬盘相关的英文术语 有个软件是根据这些SMART参数来评估硬盘寿命多长的。。。