【求助】有没有ZoneAlarm Pro的教程？

水星思路

我记得当初组网的时候在主机上装了诺顿个人防火墙，在信任地址里要加一整个IP段：192.168.0.1-192.168.0.255

Nicole

最初由 水星思路 发布
我记得当初组网的时候在主机上装了诺顿个人防火墙，在信任地址里要加一整个IP段：192.168.0.1-192.168.0.255

局域网的内部IP~~也就是内网IP~~如果没组局域网的就不用加了呀~~

麻仓叶

tony呢？

我还是不能让局域网中的机器上网。。。。

gloomy。。。

*_*

eviltony

你是用什么组网的？wingate吗？在zap里打开wingate使用的端口试试。端口是那个，你自己查查就知道了，如果不是用wingate，你也找以下共享的断口。
fire wall->expert里设置断口。

麻仓叶

我用的是网卡共享啊。。。
就是直接在虚拟拨号的属性里设置的共享啊～～

tony_x

Enabling Internet Connection Sharing
If you are using Windows' Internet Connection Sharing (ICS) option, or a third-party connection sharing program, you can protect all of the computers that share the connection from inbound threats by installing Zone Labs security software on the gateway machine only. However, to receive outbound protection, or to see alerts on the client machines, you must have Zone Labs security software installed on the client machines as well.

      Before you configure Zone Labs security software, use your ICS software to set up the gateway and client relationships. If you use hardware such as a router to share your Internet connection rather than Microsoft's Internet Connection Sharing (ICS), ensure that the local subnet is in the Trusted Zone, and skip the steps below.  

这是help里关于连接共享的说明，我看了一下，他就让你设置你的共享软件gateway，看来是搞不定了，实在不行，发封信去问问。