安装插件的问题，指令忘了

单色彩虹

看304MKV，听取了建议下载了COREAVC插件。忘记怎么装了，以前是输指令来着的，指令给忘了。
大大们指点一下  谢谢谢~~

工 藤 新一

写一个bat或者直接命令行

注册命令是
regsvr32 CoreAVCDecoder.ax

反注册是

regsvr32 /u CoreAVCDecoder.ax

单色彩虹

谢谢额   成功安装了。不过还是看不了，机器太差呵呵

keithkid

你确定你现在用coreavc在解码？你的配置多少？很多人多只是装了，但忘记禁用ffdshow

单色彩虹

这是我的配置
MPlayer dev-CVS-050131-20:07 (C) 2000-2005 MPlayer Team
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Stepping: 3)
Detected cache-line size is 32 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.
getch2: 6 can't get number of input events [disabling console input]
Playing E:\柯南\304震动的警视厅 1200万人质.mkv.
[mkv] Track ID 1: video (V_MS/VFW/FOURCC), -vid 0
[mkv] Track ID 2: audio (A_AC3), -aid 0, -alang jpn
[mkv] Track ID 3: subtitles (S_TEXT/SSA), -sid 0, -slang chi
[mkv] Track ID 4: subtitles (S_TEXT/SSA), -sid 1, -slang chi
[mkv] Track ID 5: subtitles (S_TEXT/SSA), -sid 2, -slang chi
[mkv] Track ID 6: subtitles (S_TEXT/SSA), -sid 3, -slang chi
[mkv] Track ID 7: subtitles (S_TEXT/UTF8), -sid 4, -slang chi
[mkv] Track ID 8: subtitles (S_TEXT/UTF8), -sid 5, -slang chi
[mkv] Will play video track 1
[mkv] Will play audio track 2
[mkv] Will display subtitle track 3
Matroska file format detected.
VIDEO: [H264] 704x528 16bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s)
dvdsublang...304??1200 ?zh ch tw
dvdsublang...304??1200 ?zh ch tw
dvdsublang...304??1200 ?zh ch tw
dvdsublang...304??1200 ?zh ch tw
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
AC3: 2.0 (stereo) 48000 Hz 192.0 kbit/s
AUDIO: 48000 Hz, 2 ch, 16 bit (0x9), ratio: 24000->192000 (192.0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
Opening video filter: [expand w=4 h=3]
Expand: 4 x 3, -1 ; -1 (-1=autodetect) osd: 0
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffh264] vfm:ffmpeg (FFmpeg H.264)
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little-endian 16-bit signed int
AF_pre: 48000Hz 2ch little-endian 16-bit signed int
AO: [win32] 48000Hz 2ch little-endian 16-bit signed int (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 704 x 528 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
Expand filter uninited.
VO: [directx] 704x528 => 704x528 Planar YV12
No accelerated IMDCT transform found
Using MMX optimized resampler

************************************************
**** Your system is too SLOW to play this! ****
************************************************
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try -hardframedrop.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.
[h264 @ 009FCEF0]illegal short term buffer state detected
[h264 @ 009FCEF0]illegal short term buffer state detected

MPlayer interrupted by signal 8 in module: decode_video



---------
我没有ffdshow也没有暴风什么的，就一个MPlayer播放器

(插件方面的知识不怎么懂呵呵)

keithkid

现在用的还是mplayer自己的H.264的解码~~~其实就是和ffdshow一个解码~~~

mplayer的解码不需要注册的，但是要把相应的dll放对位置，至于要不要改ini文件我忘了~~~